Paper Tray Setting - Konica Minolta BIZHUB PRO 1050 Operator's Manual

6
6.8

Paper Tray Setting

Each paper tray has been preset with paper size, paper type/weight, and air
assist on/off by machine manager.
Paper Size
The machine manager has been set each tray to detect the standard paper
size when loaded or exclusively to accommodate a specific size. (non-stand-
ard size, wide size, or tabbed paper size)
The tray specified as standard size or tabbed paper size allows APS (Auto-
matic Paper Selection), AMS (Automatic Magnification Selection), and Rota-
tion to function, and the tray specified as wide size allow AMS and Rotation.
The size selection for each tray can be altered temporarily from the Copy
Screen.
Paper Type/Weight
The machine manager specifies various paper conditions (Type, Weight,
Colored Paper, Hole-Punch, Both Sides Adjustment) for each tray.
The selection for each can also be altered temporarily from the Copy Screen
to make a copy using different type of paper.
Air Assist On/Off
For details of this function, contact your machine manager.
The following describes how to use APS, AMS, Rotation functions, and how
to temporarily change the paper size and other conditions specified for each
tray by machine manager.
6-42
Basic Job Settings
bizhub PRO 1050