Sorting / Stapling Copies (Fs-503 Finisher) - Konica Minolta BIZHUB PRO 1050 Operator's Manual

9
9.4

Sorting / Stapling Copies (FS-503 Finisher)

The FS-503 Finisher has a primary (main) tray and a secondary (sub) tray,
each of which has the following output modes.
Output to the Primary (Main) Tray:
- Non-sort:
Non-sort mode simply means that the offset-stacker finisher modes are
not selected. Copies will be stacked upon exit without being offset by
sorted sets.
- Collated:
Collated mode outputs multiple copies of the original set, having each
sorted set offset by 30mm upon exit.
- Uncollated:
Uncollated mode groups together multiple copies of each original and
offsets the sets by 30mm upon exit.
- Staple:
Staple mode offsets and staples each sorted set.
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Non-sort
9-14
Staple
2 staples
Offset by 30mm
1 oblique
staple
Setting Output Methods
Example:
Make 3 copied sets
from 4 original sheets
Collated Uncollated
Offset by 30mm
bizhub PRO 1050