To Specify Desired Paper Size (Ams) - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

Basic Job Settings

To Specify Desired Paper Size (AMS)

When a paper size is specified on the touch panel, an appropriate reduction

or enlargement ratio will be selected automatically according to the original

size detected from the ADF or the original glass.

Specifications for AMS:

- AMS is incompatible with APS, however, Rotation is available.

- AMS will not function if the tray of the size specified as non-standard is

Touch a tray key on the Copy Screen to select the desired paper size.

Selected tray key will be highlighted, and the Auto Zoom key will also

be highlighted.

For details, refer to "To Copy in 1.000 Magnification Mode" on page 6-28.

Select additional copy conditions as desired, then position original(s).

Press [Start].

Scanned image will be printed on the specified paper size in the mag-

nification ratio automatically selected.

See the table below for the original size, copy paper size, and magnifi-

cation ratio automatically selected.

bizhub PRO 1050

Original size