Konica Minolta BIZHUB PRO 1050 Operator's Manual page 181

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

Job Management

Select the desired job, then select the job operation.

To specify the next job to be printed:

Touch to highlight the desired reserve job key, then touch [Print Nex]t.

The highlighted reserve job will be moved just under the current print

This will not function if printing operation has already been started for the

selected job.

To change the order of jobs:

Touch to highlight the desired reserve job key, then touch [Priority].

The highlighted job will be advanced by one in printing order unless the

job preceding the selected one is already in progress.

If printing order cannot be changed for the selected job, a message will

be displayed for information.

To suspend reserve job:

Touch to highlight the desired reserve job key, then touch [Suspend].

Printing operation for the selected job will be suspended and kept

stored in memory.

In this case, the letters Suspended on the key will turn red at the bottom

of the Job List Screen to prompt you that a suspended job remains in the

machine. Touch [Suspended] to resume printing operation. For details,

refer to "To Check/Operate Suspended Jobs" on page 7-9.

To clear reserve job:

Touch to highlight the desired reserve job key, then touch [Delete].

Touch Yes on the popup menu to clear the selected job.

All the data of the selected job will be cleared.

To check the settings of reserve job:

Touch to highlight the desired reserve job key, then touch [Details].

Check the settings of the selected job on the screen. Touch Close to

return to the Job List Screen.

bizhub PRO 1050

Troubleshooting