Loading Tabbed Sheets - Konica Minolta bizhub pro C6500P User Manual

6
6.3

Loading Tabbed Sheets

Tabbed sheets can be used if the tray paper type is specified as tabbed
sheets in the Paper Setting. Follow the procedure below to supply the tray
with tabbed sheets.
To load tabbed sheets in main body trays (tray 1 to 3)
0 The tray paper type should be specified as tabbed sheets. See page 3-18
for the details of Paper Setting.
Rear
Rear
1
Withdraw the tray to be loaded with tabbed sheets.
2
Open the paper feed roller.
3
Place tabbed sheets on the tray.
– Place paper referring to the illustration shown above.
4
Move the side guide plates to the edge of the paper.
– Set paper aligning it to the paper feed roller side of the tray.
– Press the release lever of the front side guide plate to move the side
guide plates, and also move the rear edge guide to the edge of the
paper.
5
Push in the tray until it locks into place.
6-22
Example: 3 Tabbed sheets loaded in position for one finished set.
1st TAB
Front
2nd TAB
3rd TAB
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1st TAB
Front
2nd TAB
3rd TAB
Supplies & Handling
Printed
side
ONE FINISHED SET
1st TAB
Printed
side
3 FINISHED SETS
bizhub PRO C6500P
1st TAB
2nd TAB
3rd TAB
2nd TAB
3rd TAB