Konica Minolta BIZHUB PRO 1050 Operator's Manual page 610

17
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [12 IS
OpenAPI].
2
For each item, select or enter a required value.
- IS OpenAPI
Select [Use] or [Not Use].
- IS OpenAPI over SSL
Select [Use] or [Not Use].
- IS OpenAPI Authentication
Select [On] or [Off].
- IS OpenAPI Login Name
Touch [IS OpenAPI Login Name] to display an input screen. After
entering in the field, touch [OK].
- IS OpenAPI Login Password
Touch [IS OpenAPI Login Password] to display an input screen. Af-
ter entering in the field, touch [OK].
- IS OpenAPI Port Number
Touch [IS OpenAPI Port Number] to display an input screen. After
entering in the field, touch [OK].
- IS OpenAPI Port Number (SSL)
Touch [IS OpenAPI Port Number (SSL)] to display an input screen.
After entering in the field, touch [OK].
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
17-106
Machine Manager Setting
bizhub PRO 1050