Touch Screen Adjustment - Konica Minolta BIZHUB PRO 1050 Operator's Manual

16
16.5

05 Touch Screen Adjustment

Use this function to check the touch screen and realign the position of the
touch sensor that may have shifted.
!
Details
The Touch Screen Adjustment Screen can be displayed on the Utility
Menu Screen by pressing [5] of the control panel keypad.
Procedure
1
Touch [05 Touch Screen Adjustment].
2
Touch the "+" symbol at the upper right corner, then lower left corner
on the screen. The present coordinates will be displayed in the mes-
sage area of the screen.
3
Check that the X coordinate and Y coordinate displayed in the first line
of the message area fall within the standard value displayed in the sec-
ond line.
4
Touch each [Check Button] at the upper left and lower right corners on
the screen to check if the buzzer tone functions normally.
5
If the coordinates fall out of the range of the standard value in step 3,
or the buzzer tone does not sound in step 4, repeat the adjustment pro-
cedure from steps 2 to 4 or contact your service representative.
6
Press [1] of the control panel keypad to return to the screen before
pressing [Utility/Counter] on the control panel.
16-44
User Setting
bizhub PRO 1050