Konica Minolta BIZHUB PRO 1050 Operator's Manual page 424

13
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [04 Stacker Adj.].
2
Touch [01 Paper Width Adjustment] to display the Paper Width Adjust-
ment Screen.
3
Touch the [COPY] tab to display the Copy Screen.
4
Specify [A3] then press [Start]. A sample pattern (No. 16) will be output.
5
If output sheets are misaligned, touch the [ADJUSTMENT] tab.
6
Touch [Next] or [Back] to select the desired Stacker No..
7
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -20 (narrow) to +20 (wide), 1 step = 0.1 mm
8
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Stacker Adjustment Mode Menu Screen.
13-54
Adjustment
bizhub PRO 1050