Konica Minolta BIZHUB PRO 1050 Operator's Manual page 50

2
A few seconds after the Wake-up Screen appears in the touch panel,
the Machine Status Screen with four types of warm-up image will be
displayed in succession for approx. 6.0 minutes.
!
Details
You can set reserve jobs while the machine is warming up.
Touch the touch panel to change the Machine Status Screen with warm-
up image to the screen with the job list, then check that the message
"Ready to copy reserve" is displayed in the message area.
4
The Machine Status Screen with the Job list will be displayed.
The message on the Machine Status Screen will inform you that copy-
ing job is now available.
!
Details
Machine manager may have changed the screen to be displayed after the
machine power is on, so that a user should enter the user name and
password to operate the machine. For details, refer to "Making User Au-
thentication" on page 2-27.
If a key counter or copy card is required, follow the instruction on the
screen.
2-18
Preparation for Use
bizhub PRO 1050