Dialling And Transmission Problems - Sharp FO-2550 Operation Manual

Problems and Solutions

Dialling and transmission problems

Problem
No dial tone when you
pick up the handset or
press the SPEAKER key.
Dialling is not possible.
The power is on, but no
transmission takes place.
Nothing is printed at the
receiving end.
11-4
Check and remedy
Make sure the handset cord is connected
to the correct socket, and the telephone
line is connect to the correct socket. See
Handset Telephone line cord
and
Connections in Chapter 12.
Make sure the power cord is properly
plugged into a power outlet.
Make sure that the telephone line is
properly connected to both the TEL. LINE
socket and the wall socket.
Make sure that the Sharp MFP is set to the
correct dialling mode for your telephone
line. See Option Setting 7
Make sure that the receiving machine has
fax paper.
Make sure that the telephone line cord is
plugged into the TEL. LINE socket, and not
the TEL. SET socket.
If the receiving machine is in TEL mode
with no attendant, reception will not be
possible.
If the receiving machine is not a Sharp
model, make sure it is G3 compatible.
Check the display for error messages.
Pick up the handset and check for a dial
tone.
Make sure that the document for
transmission is placed face down in the
feeder.
Make sure that the fax paper is properly
loaded in the receiving machine.
in
in Chapter 8.