Messages And Signals; Messages In The Display Of The Sharp Mfp - Sharp FO-2550 Operation Manual

Messages and Signals

Messages in the display of the Sharp MFP

CAN'T PRINT DATA/
CHECK MAN FEEDER/
REMOVE PAPER
CAN'T PRINT DATA/
COL CARTRIDGE!/
CHANGE TO BLACK
CAN'T PRINT DATA/
(other message)
CHECK MAN FEEDER/
USE AUTO FOR RX
COL CARTRIDGE!/
USE BLACK FOR RX
11-8
You have received a fax, however, a sheet of
media is loaded in the manual paper feeder.
Press the PRINTER key to remove the media
from the manual feeder and the fax will print out
automatically. (To print the fax on the media in
the manual paper feeder, press the FUNCTION
key, 8 and START .)
You have received a fax, however, a colour print
cartridge is installed. We recommend that you
change to a black print cartridge. (To print the
fax one page at a time with the colour cartridge,
press the FUNCTION key, 8 , and START .)
A fax has been received to the memory of the
Sharp MFP because printing is not possible or
not recommended (the additional message that
appears will indicate the problem). The fax will
print out automatically when the problem is
resolved. For more information, see
Reception to Memory
Media has been loaded in the manual sheet
feeder. To allow normal reception of faxes,
promptly use the media in the sheet feeder or
press the PRINTER key to eject the media.
(Normal printing from the automatic paper tray is
not possible while media is loaded in the manual
sheet feeder.)
This message appears when a colour print
cartridge is installed. To allow reception of faxes,
we recommend that you keep a black cartridge
installed normally and change to a colour
cartridge only when you need to print a colour
job. (Note: If this message appears and a black
cartridge is installed, correct the cartridge
selection by pressing the CARTRIDGE key and
then 1 (OLD BLACK) or 3 (NEW BLACK).)
Substitute
in Chapter 3.