Table of Contents
Advertisement
> Before start > Hookup > Setup > Playback
Remote Controller
1
2
3
4
5
6
7
8
9
10
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (Quick Menu) button: You can perform common settings on the
TV screen. (
P26)
4. Cursor buttons and Enter button: Select the item with the cursors
and press Enter to confirm your selection.
5.
button: Displays the Setup menu.
6. Volume buttons: Allows you to adjust the volume. This button
also cancels the muting.
7.
button: Temporarily mutes audio. Press again to cancel
muting.
8. Listening Mode buttons: Allows you to select the listening mode.
11
(
P22)
Main/Zone 2/Zone 3 buttons: Controls the multi-zone function.
(
P25)
12
9. Play buttons: You can start play of the Music Server or USB.
10.
button: You can start repeat or random play of the Music
Server or USB.
Clear button: Deletes all characters you have entered when
entering text on the TV screen.
11. Dimmer button: You can adjust the brightness of the display in
13
three steps. It cannot be turned off completely.
12.
button: Switches the information on the display.
13.
button: Returns the display to the previous state.
14.Mode button: Switches tuning to an AM/FM station between
automatic tuning and manual tuning.
15.Memory button: Used to register AM/FM radio stations.
30°
30°
14
15
> Part Names
Display
1
1. Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode.
2. Lights in the following conditions.
Ë: When headphones are connected.
Z2/Z3: When ZONE 2/ZONE 3 is on.
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network
is not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the
USB is not properly connected.
HDMI: When HDMI signals are input and the HDMI input is selected.
DIGITAL: When digital signals are input and the digital input is
selected.
3. Lights according to the type of input digital audio signals and the
listening mode.
4. Lights in the following conditions.
RDS (Australian models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: When the sleep timer is set.
AUTO STBY: When Auto Standby function is enabled.
5. Flashes when muting is on.
6. Displays various information of the input signals. Characters that
cannot be displayed on this unit are replaced with asterisks ( ＊ ).
0 When playing back software which has been encoded in Dolby
Approx.5 m
Digital, Dolby Digital Plus and Dolby TrueHD, sometimes you may
(16 ft.)
see a brief message which will read "DialogNorm: X dB" (X being a
numeric value). For example, if you see the following message:
"DialogNorm:+4dB", to keep the overall output level at THX
calibrated loudness, just turn down the volume control by 4dB.
7. Lights when operating the "NET" input selector indicating remote
controller cursor operations are possible in screens showing list of
tracks, for example.
> Advanced Manual
Troubleshooting | Appendix
2
3
7
6
4
5
7
29
Hide quick links:
Advertisement
Chapters
Table of Contents
