Display - Integra DTR-20.7 User Manual

1 23 4
9

Display

Lights in the following conditions. "Z2": Zone 2 output
1
is on. / "HDMI": HDMI signals are input and HDMI
input selector is selected. / "ARC": Audio signals are
input from ARC compatible TV and TV input selector
is selected. / "3D": Input signals are 3D. / "USB" ():
When input is "NET" and USB is connected and
selected. / "NET" (): "NET" input is selected and
the unit is connected to the network. / "DIGITAL":
Digital signals are input and the digital input selector is
selected. / Cursor indicators: NET or USB is controlled.
 "USB" and "NET" will flash if the connection is not correct.
¼
Stays lit when headphones are connected.
2
Lights when playing NET or USB.
3
Lights according to the type of input digital audio signals
4
and the listening mode.
Stays lit when Music Optimizer is enabled.
5
Lights in the following conditions. "AUTO": Tuning mode
6
is auto. / "TUNED": Receiving AM/FM radio. 
flashes while tuning is automatically performed. / "FM
STEREO": Receiving FM stereo. / "RDS" (Australian
models): Receiving RDS broadcasting.
Flashes when muting is on.
7
Lights in the following conditions. "SLEEP": Sleep timer
8
has been set. / "ASb" (Auto Standby): Auto Standby
is on. / "ch": Channel is being set. / "Hz": Crossover
frequencies are being set. / "m/ft": Speaker distances
are being set. / "dB": Speaker volume is being set.
Displays various information of the input signals.
9
Pressing Display displays the type of input digital signals
and the listening mode.
5 6 7
8
En-5