Other Settings; Using The Pure Direct Mode - Denon DVD-3930 Operating Instructions Manual

Other settings

[ D H ]
[ PURE DIRECT
MEMORY]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Using the pure direct mode

Use this function to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound.
1
In the stop mode, press
• The pure direct memory screen appears.
2 [D D H H ]
Use
[ENTER]
press
3 [D D H H ]
Use
[ ENTER ] [ENTER]
, then use
DIGITAL OUTPUT:
• ON (Upon purchase), OFF:
Select whether or not to output signals to the digital audio output
terminals.
[ PURE DIRECT
SELECT]
The DENON LINK digital output circuitry does not function.
VIDEO OUT:
• ON (Upon purchase), OFF:
Select whether or not to output video signals.
DISPLAY:
• ON (Upon purchase), OFF:
Select whether or not to light the DVD-3930's display.
4
[PURE DIRECT MEMORY]
Press
• The settings are stored at "MODE 1" or "MODE 2".
[PURE DIRECT MEMORY]
to select "MODE 1" or "MODE 2", then
.
to select the item you want to set, press
[D D H H ]
again to make the setting.
.
28
ENGLISH
5 [PURE DIRECT SELECT]
Press
mode.
• The mode is indicated on the display.
NORMAL:
. All signals are output.
MODE 1:
The player operates as per the settings stored at "MODE 1".
MODE 2:
The player operates as per the settings stored at "MODE 2".
ALL OFF:
Only the analog audio signals are output.
2
3
• With HDMI connections, no video or audio signals are output from
the HDMI terminals if "VIDEO OUT" is set to "OFF" in step
the "ALL OFF" mode is selected in step
ENGLISH
and select the setting
3 or if
5
.