Chapter 8: Postinstallation Administration; Verifying Translations - Avaya S8500 Installing And Configuring

Chapter 8: Postinstallation administration

This section covers the following tasks:

Verifying translations

●
Setting rules for daylight savings time
●
Setting locations (if necessary)
●
Verifying the date and the time
●
Clearing and resolving alarms
●
Backing up files to the compact flash media
●
Enabling alarms to INADS by way of a modem
●
Enabling alarms to INADS by way of the SNMP module
●
Before leaving the site
●
Verifying translations
1. Open a SAT session on the media server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
3. To verify the location of the IPSI circuit packs,type list ipserver-interface and
press Enter.
For more information, see your planning documents and check the administration status on the
following items:
● list station
● list trunk-group
● list hunt-group
Installing and Configuring the Avaya S8500 Media Server
on page 69
on page 70
on page 71
on page 72
on page 72
on page 76
on page 75
on page 75
on page 76
69
February 2007