Table of Contents
Advertisement
Chapter 7: Postinstallation administration
This section covers the following tasks:
Verifying translations
l
Setting rules for daylight savings time
l
Setting locations (if necessary)
l
Verifying the date and the time (main server only)
l
Clearing and resolving alarms
l
Enabling and disabling the Ethernet switch ports
l
Backing up files to the compact flash media
l
Enabling alarms to INADS by way of a modem
l
Enabling alarms to INADS by way of the SNMP module
l
Before leaving the site
l
Verifying translations
1. Open a SAT session on the server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
3. To verify the location of the IPSI circuit packs,type list ipserver-interface and
press Enter.
For more information, see your planning documents and check the administration status on the
following items:
list station
l
list trunk-group
l
list hunt-group
l
on page 73
on page 74
on page 75
on page 77
on page 81
on page 76
on page 77
on page 80
on page 79
on page 80
Issue 8 May 2009
73
Advertisement
Table of Contents
Troubleshooting
