Chapter 7: Postinstallation Administration; Verifying Translations - Avaya S8730 Installing And Configuring

Chapter 7: Postinstallation administration

This section covers the following tasks:

Verifying translations

Setting rules for daylight savings time
Setting locations (if necessary)
Verifying the date and the time (main server only)
Clearing and resolving alarms
Enabling and disabling the Ethernet switch ports
Backing up files to the compact flash media
Enabling alarms to INADS by way of a modem
Enabling alarms to INADS by way of the SNMP module
Before leaving the site
Verifying translations
1. Open a SAT session on the server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
3. To verify the location of the IPSI circuit packs,type list ipserver-interface and
press Enter.
For more information, see your planning documents and check the administration status on the
following items:
list station
list trunk-group
list hunt-group
Installing and Configuring the Avaya S8700-Series Server
on page 67
on page 68
on page 69
on page 71
on page 74
on page 70
on page 71
on page 73
on page 72
on page 73
67
January 2008