Chapter 7: Postinstallation administration
This section covers the following tasks:
Verifying translations
●
Setting rules for daylight savings time
●
Setting locations (if necessary)
●
Verifying the date and the time
●
Clearing and resolving alarms
●
Backing up files to the compact flash media
●
Enabling alarms to INADS by way of a modem
●
Enabling alarms to INADS by way of the SNMP module
●
Before leaving the site
●
Verifying translations
1. Open a SAT session on the media server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
IPSI For more information, see your planning documents and check the administration status
on the following items:
list station
●
●
list trunk-group
●
list hunt-group
Installing and Configuring the Avaya S8400 Media Server
on page 47
on page 48
on page 49
on page 50
on page 50
on page 52
on page 51
on page 51
on page 52
47
February 2007