Chapter 7: Postinstallation Administration; Verifying Translations - Avaya S8700 Series Installing And Configuring

Chapter 7: Postinstallation administration

This section covers the following tasks:

Verifying translations

●
Setting rules for daylight savings time
●
Setting locations (if necessary)
●
Verifying the date and the time
●
Clearing and resolving alarms
●
Enabling and disabling the Ethernet switch ports
●
Backing up files to the compact flash media
●
Enabling alarms to INADS by way of a modem
●
Enabling alarms to INADS by way of the SNMP module
●
Before leaving the site
●
Verifying translations
1. Open a SAT session on the media server.
2. To view all the administered circuit packs in the system, type list configuration all
and press Enter.
3. To verify the location of the IPSI circuit packs,type list ipserver-interface and
press Enter.
For more information, see your planning documents and check the administration status on the
following items:
● list station
● list trunk-group
● list hunt-group
Installing and Configuring the Avaya S8700-Series Media Server
on page 59
on page 60
on page 61
on page 62
on page 62
on page 66
on page 63
on page 65
on page 65
on page 66
59
February 2007