Part Names And Functions - Omron NP3 Series Introduction Manual

1-2 Part Names and Functions

This section gives the names and functions of the parts on a 3-switch model.
● Front View
a POWER LED
The POWER LED is lit while power is ON.
b Display area
The display area functions as a touch switch. You can use this area as an input
device.
c Function switches
Switches used for input. Each switch can have various functions allocated
depending on the screen.
• Do not press touch switches with a force greater than 30N.
Note
• Before pressing a touch switch, check system safety.
• Do not press touch switches when the backlight is not lit or when there is no
display.
• Do not press touch switches in rapid succession. The NP possibly does not
accept every input data. Make sure that each input command is accepted before
proceeding to the next command.
1-2 Part Names and Functions
NP Introduction Manual
1
1
15