Fortinet MR1 User Manual page 636

Data Threshold Rate - Enter the minimum source data rate in K bits/second above which the last-hop
router will switch to a source-specific shortest path tree. The valid values are from (0 to 2000 K bits/sec) .
The default value is 50.
Register Threshold Rate - Enter the minimum source data rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree. The valid values are from (0
to 2000 K bits/sec) . The default value is 50.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Viewing PIM-SM Global Configuration Page
Non-Configurable Data
Admin Mode - The administrative status of PIM-SM in the router: either enable or disable.
Join/Prune Interval - The interval between the transmission of PIM-SM Join/Prune messages.
Data Threshold Rate - The minimum source data rate in K bits/second above which the last-hop router
will switch to a source-specific shortest path tree.
Register Threshold Rate - The minimum source data rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
636