Ip Ipv6 - Fortinet MR1 User Manual

Default Setting
None
Command Mode
Global Config

5.3.1.10 ip ipv6

This command is used to enable the Ipv6 function on specific interface.
Syntax
ip ipv6
no ip ipv6
no - disable IPv6.
Default Setting
Enabled
Command Mode
Interface Config
This command is used to enable the Ipv6 function on all interfaces.
Syntax
ip ipv6 all
no ip ipv6 all
all - All interfaces.
no - disable IPv6.
Default Setting
Enabled
131