Sntp Clock Timezone; System Utilities; Clear; Clear Arp - Fortinet MR1 User Manual

Command Mode
Global Config

5.10.2.8 sntp clock timezone

This command sets the time zone for the switch's internal clock.
Syntax
sntp clock timezone <name> <0-12> <0-59> {before-utc | after-utc}
<name> - Name of the time zone, usually an acronym. (Range: 1-15 characters)
<0-12> - Number of hours before/after UTC. (Range: 0-12 hours)
<0-59> - Number of minutes before/after UTC. (Range: 0-59 minutes)
before-utc - Sets the local time zone before (east) of UTC.
after-utc - Sets the local time zone after (west) of UTC.
Default Setting
Taipei 08:00 After UTC
Command Mode
Global Config

5.11 System Utilities

5.11.1 clear

5.11.1.1 clear arp

This command causes all ARP entries of type dynamic to be removed from the ARP cache.
236