Dhcp Relay Commands; Show Bootpdhcprelay - Fortinet MR1 User Manual

no ip dhcp client-identifier
<text> - A text string. (Range: 1-15 characters).
<hex> - The hexadecimal value (00:00:00:00:00:00).
no - This command is used to restore to default value.
Default Setting
System Burned In MAC Address
Command Mode
Global Config

5.3.9 DHCP Relay Commands

5.3.9.1 Show bootpdhcprelay

This command is used to display the DHCP relay agent configuration information on the
system.
Syntax
show bootpdhcprelay
Default Setting
None
Command Mode
Privileged Exec
Display Message
Maximum Hop Count - The maximum number of Hops a client request can go without being discarded.
Minimum Wait Time (Seconds) - The Minimum time in seconds. This value will be compared to the time
stamp in the client's request packets, which should represent the time since the client was powered up.
Packets will only be forwarded when the time stamp exceeds the minimum wait time.
Admin Mode - Administrative mode of the relay. When you select 'enable' BOOTP/DHCP requests will be
forwarded to the IP address you entered in the 'Server IP address' field.
162