Ip Pimsm Query-Interval; Ip Pimsm Cbsrpreference - Fortinet MR1 User Manual

7.5.2.7 ip pimsm query-interval

This command configures the transmission frequency of hello messages in seconds
between PIM enabled neighbors. This field has a range of 10 to 3600 seconds.
Syntax
ip pimsm query-interval <10 - 3600>
no ip pimsm query-interval
<10 - 3600> - This is time interval in seconds.
no - This command resets the transmission frequency of hello messages between PIM enabled
neighbors to the default value.
Default Setting
30
Command Mode
Interface Config

7.5.2.8 ip pimsm cbsrpreference

This command is used to configure the CBSR preference for a particular PIM-SM interface.
The range of CBSR preference is –1 to 255.
Syntax
ip pimsm cbsrpreference <-1 - 255>
no ip pimsm cbsrpreference
<-1 - 255> - The preference value for the local interface.
no - This command is used to reset the CBSR preference for a particular PIM-SM interface to the default
value.
Default Setting
0
Command Mode
Interface Config
419