Ip Igmp Last-Member-Query-Count; Ip Igmp Last-Member-Query-Interval - Fortinet MR1 User Manual

Version 4.0 mr1
Table of Contents

Advertisement

Default Setting
3
Command Mode
Interface Config

7.2.2.3 ip igmp last-member-query-count

This command sets the number of Group-Specific Queries sent before the router assumes
that there are no local members on the interface.
Syntax
ip igmp last-member-query-count <1-20>
no ip igmp last-member-query-count
<1-20> - The range for <1-20> is 1 to 20.
no - This command resets the number of Group-Specific Queries to the default value.
Default Setting
Disabled
Command Mode
Interface Config

7.2.2.4 ip igmp last-member-query-interval

This command configures the Maximum Response Time being inserted into Group-Specific
Queries sent in response to Leave Group messages on the interface.
Syntax
ip igmp last-member-query-interval <0-255>
no ip igmp last-member-query-interval
<0-255> - The range for <0-255> is 0 to 255 tenths of a second.
390

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortiswitch-100

Table of Contents