Maxsessions; Sessions - Fortinet MR1 User Manual

3
Command Mode
Telnet Config

5.3.3.6 maxsessions

This command specifies the maximum number of remote connection sessions that can be
established. A value of 0 indicates that no remote connection can be established. The range
is 0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no - This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Telnet Config

5.3.3.7 sessions

This command regulates new telnet sessions. If sessions are enabled, new telnet sessions
can be established until there are no more sessions available. If sessions are disabled, no
new telnet sessions are established. An established session remains active until the session
is ended or an abnormal network error ends it.
Syntax
sessions
no sessions
138