Defining Snmp - Fortinet MR1 User Manual

Configuring Multiple Port Mirroring Function Page
Configurable Data
Session ID - A session ID or "All Sessions" option may be selected. By default the First Session is
selected.
Session Mode - Specifies the Session Mode for a selected session ID. By default Session Mode is
enabled.
Source Port(s) - Specifies the configured port(s) as mirrored port(s). Traffic of the configured port(s) is
sent to the probe port.
Destination Port - Acts as a probe port and will recieve all the traffic from configured mirrored port(s).
Default value is blank.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on the switch.
Delete - Remove the selected session configuration.

8.2.1.7 Defining SNMP

Configuring SNMP Community Configuration Page
By default, two SNMP Communities exist:
private, with 'Read/Write' privileges and status set to enable
public, with 'Read Only' privileges and status set to enable
449