Sntp Unicast Client Poll-Timeout; Sntp Unicast Client Poll-Retry - Fortinet MR1 User Manual

no sntp unicast client poll-interval
<6-10> - Polling interval. It's 2^(value) seconds where value is 6 to 10.
no - This command will reset the poll interval for SNTP unicast clients to its default value.
Default Setting
The default value is 6.
Command Mode
Global Config

5.10.2.5 sntp unicast client poll-timeout

This command will set the poll timeout for SNTP unicast clients in seconds.
Syntax
sntp unicast client poll-timeout <poll-timeout>
no sntp unicast client poll-timeout
< poll-timeout > - Polling timeout in seconds. The range is 1 to 30.
no - This command will reset the poll timeout for SNTP unicast clients to its default
value.
Default Setting
The default value is 5.
Command Mode
Global Config

5.10.2.6 sntp unicast client poll-retry

This command will set the poll retry for SNTP unicast clients in seconds.
234