Quick Start Up Downloading From Out-Of-Band Pc To Switch (Only Xmodem); Quick Start Up Downloading From Tftp Server; Quick Start Up Factory Defaults - Fortinet MR1 User Manual

2.4.6 Quick Start up Downloading from Out-of-Band PC
to Switch (Only XMODEM)
Table 2-6 Quick Start up Downloading from Out-of-Band PC to Switch
copy xmodem startup-config
<filename>

2.4.7 Quick Start up Downloading from TFTP Server

Before starting a TFTP server download, the operator must complete the Quick Start up for
the IPAddress.
Table 2-7 Quick Start up Downloading from TFTP Server
copy <url> startup-config
<filename>

2.4.8 Quick Start up Factory Defaults

Table 2-8 Quick Start up Factory Defaults
clear config
Command
Command
Command
Details
Sets the download datatype to be an image
or config file.
The URL must be specified as: xmodem:
filepath/ filename
For example:
If the user is using HyperTerminal, the user
must specify which file is to be sent to the
switch. The switch will restart automatically
once the code has been downloaded.
Details
Sets the download datatype to be an image
or config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The startup-config option downloads the
config file using tftp and image option
downloads the code file.
Details
Enter yes when the prompt pops up to clear
all the configurations made to the switch.
34