Distance Rip; Hostrouteaccept - Fortinet MR1 User Manual

6.6.2.6 distance rip

This command sets the route preference value of RIP in the router. Lower route preference
values are preferred when determining the best route.
Syntax
distance rip <1-255>
no distance rip
<1 - 255> - the value for distance.
no - This command sets the default route preference value of RIP in the router.
Default Setting
15
Command Mode
Router RIP Config

6.6.2.7 hostrouteaccept

This command enables the RIP hostroutesaccept mode.
Syntax
hostrouteaccept
no hostrouteaccept
no - This command disables the RIP hostroutesaccept mode.
Default Setting
Enable
Command Mode
Router RIP Config
362