Ip Igmp Query-Interval; Ip Igmp Query-Max-Response-Time - Fortinet MR1 User Manual

no - This command resets the Maximum Response Time being inserted into Group-Specific Queries
sent in response to Leave Group messages on the interface to the default value.
Default Setting
1 second
Command Mode
Interface Config

7.2.2.5 ip igmp query-interval

This command configures the query interval for the specified interface. This is the frequency
at which IGMP Host-Query packets are transmitted on this interface.
Syntax
ip igmp query-interval <1-3600>
no ip igmp query-interval
<1-3600> - The range for <1-3600> is 1 to 3600 seconds.
no - This command resets the query interval for the specified interface to the default value. This is the
frequency at which IGMP Host-Query packets are transmitted on this interface.
.
Default Setting
125 seconds
Command Mode
Interface Config

7.2.2.6 ip igmp query-max-response-time

This command configures the maximum response time interval for the specified interface,
which is the maximum query response time advertised in IGMPv2 queries on this
interface.The time interval is specified in tenths of a second.
Syntax
ip igmp query-max-response-time <0-255>
no ip igmp query-max-response-time
<0-255> - The range for <0-255> is 0 to 255 tenths of a second.
391