Fortinet MR1 User Manual page 38

---------- -------------------------------- -------------- ------- -----------
2007/05/14
2007/11/20
2008/04/03
2008/08/19
2008/05/20
---------- -------------------------------- -------------- ------- -----------
Total: 5 files.
5. Set boot up code using the following command:
(FortiSwitch-100_238) #boot-system opcode lb4w-r-1.08.0819.img
Start Up Success!
6. Display all of the files again (start up code should be set to the new runtime code):
(FortiSwitch-100_238) #dir
date
---------- -------------------------------- -------------- ------- -----------
2007/05/14
2007/11/20
2008/04/03
2008/08/19
2008/05/20
---------- -------------------------------- -------------- ------- -----------
Total: 5 files.
Now you are finished with the upgrade procedure! Please reload the switch and configure
as desired.
Troubleshooting the Download Procedure
If you have configured an IP address (statically or via DHCP) on the FortiSwitch and still
cannot download the image file, try the following:
•
Verify that the FortiSwitch is able to access the TFTP server by using the ping
command. Substitute the IP address of your TFTP server for the one shown in the
example below:
(FortiSwitch-100_238) #ping 10.10.10.31
PING to 10.10.10.31, by 5 32-byte payload ICMP packets, timeout is 3 seconds:
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Ping statistics for 10.10.10.31 :
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
proximate round trip times:
Minimum = 0 ms, Maximum = 0 ms, Average = 0 ms
b4b-b-0.2.0514.biz Boot-Rom image
default.cfg
lb4w-r-1.04.0403.img Operation Code
lb4w-r-1.08.0819.img Operation Code
test.2
file name
b4b-b-0.2.0514.biz Boot-Rom image
default.cfg
lb4w-r-1.04.0403.img Operation Code
lb4w-r-1.08.0819.img Operation Code
test.2
38
Y
Config File N
Y
N
Config File Y
file type startup size (byte)
Y
Config File N
N
Y
Config File Y
127648
28701
8034434
8039249
29154
127648
28701
8034434
8039249
29154