Quit; Differentiated Service Command - Fortinet MR1 User Manual

5.11.15 quit

This command is used to exit a CLI session.
Syntax
quit
Default Setting
None
Command Mode
Privileged Exec

5.12 Differentiated Service Command

Note: This Switching Command function can only be used on the QoS software
version.
This chapter contains the CLI commands used for the QOS Differentiated Services (DiffServ)
package.
The user configures DiffServ in several stages by specifying:
1. Class
• creating and deleting classes
• defining match criteria for a class
Note: The only way to remove an individual match criterion from an existing class definition
is to delete the class and re-create it.
2. Policy
• creating and deleting policies
• associating classes with a policy
• defining policy statements for a policy/class combination
3. Service
• adding and removing a policy to/from a directional (that is, inbound, outbound) interface
Packets are filtered and processed based on defined criteria. The filtering criteria are defined
by a class. The processing is defined by a policy's attributes. Policy attributes may be defined
on a per class instance basis, and it is these attributes that are applied when a match occurs.
Packet processing begins by testing the match criteria for a packet. A policy is applied to a
packet when a class match within that policy is found.
254