Ip Pimsm Mode - Fortinet MR1 User Manual

ip pimsm staticrp <rp-address> <group-address> <group-mask>
no ip pimsm staticrp <rp-address> <group-address> <group-mask>
< rp-address > - the IP Address of the RP.
< group-address > - the group address supported by the RP.
< group-mask > - the group mask for the group address.
no - This command is used to delete RP IP address for the PIM-SM router. The parameter <rp-address>
is the IP address of the RP. The parameter <group-address> is the group address supported by the RP.
The parameter <group-mask> is the group mask for the group address.
Default Setting
Disabled
Command Mode
Global Config

7.5.2.6 ip pimsm mode

This command sets administrative mode of PIM-SM multicast routing on a routing interface
to enable.
Syntax
ip pimsm mode
no ip pimsm mode
no - This command sets administrative mode of PIM-SM multicast routing on a routing interface to
disabled.
Default Setting
Disbaled
Command Mode
Interface Config
418