Traceroute - Fortinet MR1 User Manual

Privileged Exec
Ping on changing parameter value
Syntax
ping <host> count <0-20000000> [size <32-512>]
ping <host> size <32-512> [count <0-20000000>]
<ipaddr> - an IP address.
<0-20000000> - number of pings (Range: 0 - 20000000). Note that 0 means infinite.
<size> - packet size (Range: 32 - 512).
Default Setting
Count = 5
Size = 32
Command Mode
Privileged Exec

5.11.8 traceroute

This command is used to discover the routes that packets actually take when traveling to
their
destination through the network on a hop-by-hop basis. <ipaddr> should be a valid IP
address. [port] should be a valid decimal integer in the range of 0(zero) to 65535. The default
value is 33434. The optional port parameter is the UDP port used as the destination of
packets sent as part of the traceroute. This port should be an unused port on the destination
system.
Syntax
traceroute <host> [hops <1-255> [waittime <1-255>]]
traceroute <host> [waittime <1-255> [hops <1-255>]]
<host> - A host name or an IP address.
<1-255> - Time to wait for a response to a probe, in seconds.
250