Figure 88
Edit bar
Figure 89
Setup page
58
Designing Touch Panel Pages
21.
Press NEW PAGE to set the page flip and return to the Button Properties page.
22.
Press EXIT SAVE CHANGE to save changes, close the Button Properties page,
and return to the Main page.
23.
Press EXIT on the PROPERTIES operation bar to close the Edit bar.
Exiting Edit Mode
This subsection describes how to exit the EDIT mode once you finish designing
touch panel pages.
1.
Press EXIT to close the Edit bar (Figure 88).
2.
Press SETUP to open the Setup page shown in Figure 89.
3.
Press PROTECTED SETUP to open the Protected Setup page shown in
Figure 90.
Color Active-Matrix LCD Mini-Touch Panels