Rack-Mount Panels - AMX Color Active-Matrix LCD Instruction Manual

Note
Once attached to the Decor-
style faceplate, the security
screws can't be replaced
without removing the overlay.
Figure 16
Rack-mount touch panel
Figure 17
AXM-MCA/PB rack mount
16 Installing Mini-Touch Panels
16.
Fasten the mini-touch panel to the BB-MTP with the #6-32 screws supplied.
17.
Place the UniMount backing plate or Decor-style faceplate onto the bezel. You
can optionally secure the Decor faceplate to the bezel using the four Phillips flat-
head security screws.
18.
Remove the backing from the adhesive tape strips.
19.
Press the engraved overlay onto the UniMount or Decor-style faceplate.
20.
Reconnect the AXlink wiring to the Central Controller, and video wiring to the
video source. The mini-touch panel will beep when you apply power.

Rack-mount panels

These instructions describe installing the rack-mounted touch panels listed in
Figure 16.
Rack-mount touch panel
UniMount
AXM-MCA (/PB)
AXM-MCV (/PB)
Figure 17 shows an AXM-MCA/PB rack-mount touch panel.
Color Active-Matrix LCD Mini-Touch Panels