Figure 219
3
Front view of an AXCENT
PRO Integrated AXCESS
ControlFrame
Note
If the AXlink light is not blink-
ing, use the OpenAXCESS
program to prepare the Cen-
tral Controller. Refer to the
Open AXCESS Configuration
and Diagnostic Program in-
struction manual for detailed
information.
Note
TPDesign program supports
uploading of G2 touch panel
project files.
152
Upgrading from G2 to G3 Firmware
PROGRAM port for the
DB-9 connection
The green AXlink indicator adjacent to the PROGRAM port blinks when the Central
Controller is working properly. The LED blinks patterns to indicate AXlink commu-
nication activity, power, and data status as follows:
One blink per second
cation is functioning.
Two blinks per second
CESS program do not match the devices connected to the Central Controller.
Three blinks per second
Full-on
Indicates the following conditions:
There is no AXlink control or activity, but power is on
The AXCESS program is not loaded.
Backing up Touch Panel Pages
TPDesign (16-bit) is used to upload and download touch panel pages that are firm-
ware version 2.xx (or lower).
1.
Double-click the TPDesign icon from the AMX Control Disc folder; the Main
screen (Figure 220) appears. Refer to the TPDesign3 Touch Panel Program instruc-
tion manual for detailed information.
Indicates power is active and AXlink communi-
Indicates that the devices specified in the AX-
Indicates an AXlink communication error.
Color Active-Matrix LCD Mini-Touch Panels