Standard Buttons; General Buttons; Selection Buttons - AMX Color Active-Matrix LCD Instruction Manual

Figure 26
Touch Panel pages with
linked buttons
24 Touch Panel Basics
Setup
Page 1
Page
Main Page
Page 2 Main
Page 1
Page 3 Page 1
Page 2
Page 4
Page 3
Page 5
Page 4
Main

Standard Buttons

Standard buttons types are rectangles, rectangle variations, and other geometric
shapes that you can create with the touch panel editor. Buttons are set with attributes,
which means there is feedback for the Central Controller when you touch the button.

General Buttons

General buttons are part of the mini-touch panel program and cannot be changed.
You use general buttons to specify panel communication parameters and create or
revise pages. Button examples include selection buttons, information buttons, ad-
justment buttons, and operation bars. Each type of General button is described in the
following paragraphs.

Selection buttons

Selection buttons (Figure 27) appear on touch panel pages and set communication pa-
rameters.
Page 2
Page 3
Page 4
Page 5
Color Active-Matrix LCD Mini-Touch Panels