Device Used; Setup Password; Mouse Button - AMX Color Active-Matrix LCD Instruction Manual

Figure 107
DEVICE BASE button
Note
If four devices are used, and
the base address is 128, then
the touch panel will use de-
vice numbers 128, 129, 130,
and 131 consecutively.
Figure 108
DEVICE USED button
Figure 109
SETUP PASSWORD button
Warning
If you change the password
number, record the new num-
ber and keep it in a secure
place. If you change the
password, AMX cannot pro-
vide you with the password.
Note
You can still control the touch
panel with your finger when
mouse control is active.
Figure 110

MOUSE button

Color Active-Matrix LCD Mini-Touch Panels

Device used

Press the DEVICE USED button (Figure 108) to open a keypad and set the panel's de-
vice number from 1 through 4. Each device number supports up to 255-channel code
button assignments. The multiple device settings allow you to create up to four
unique touch panel buttons and/or pages. This value is used to determine the current
device being used by the panel.

Setup password

Press the SETUP PASSWORD button (Figure 109) to open a keypad and set the nu-
meric SETUP password.
The password number range is 1 through 5,999. (Do not use zero.) Do not change the
Setup page password unless you are concerned about unauthorized access to the
touch panel pages.
CLEAR
Press to clear the number in the keypad display.
ENTER
Press to enter the new password into touch panel memory and
close the keypad.
Mouse button
Press the MOUSE button (Figure 110) to open the Mouse Setup page shown in
Figure 111.
Touch Panel Program Reference 71