Setting The Level Code - AMX Color Active-Matrix LCD Instruction Manual

Note
The panel will not allow you to
enter a device number greater
than the DEVICE USED with-
out first displaying a decision
box. This box asks you to de-
cide whether you accept the
new selection or default to the
previous value.
Note
The channel code for non-
active buttons is 0 and for
active buttons is 1 through
255.
Figure 74
LEVEL code buttons
Note
The panel will not allow you to
enter a device number greater
than the DEVICE USED with-
out first displaying a decision
box. This box asks you to de-
cide whether you accept the
new selection or default to the
previous value.
Note
Joysticks actually use two
level numbers. The first is for
the X-axis and the second is
for the Y-axis. You only need
to specify the first level.
Color Active-Matrix LCD Mini-Touch Panels
1.
Press DEV to open a keypad and set the joystick's device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The device number specifies the device number
that the selected channel's feedback displays.
3.
Press ENTER to store the device number into memory, close the keypad, and re-
turn to the Button Properties page.
4.
Press CHAN to open the keypad and enter a channel value of 1 through 255 in
the keypad. The AXCESS software program uses the channel code number to
identify the button and its' programmed operations.
5.
Press ENTER to store the channel number in memory, close the keypad, and re-
turn to the Button Properties page.

Setting the level code

The level buttons that set the device and number codes for the touch panels are
shown in Figure 74.
1.
Press DEV to open a keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device
codes 1 through 4 to identify the touch panel. Refer to the Touch Panel Program
Reference section for detailed information.
3.
Press ENTER to store the level device number in memory, close the keypad, and
return to the Button Properties page.
4.
Press NUM to open a keypad and set the level number assigned to the device.
5.
Enter 1 in the keypad.
6.
Each device can have from 1 through 8 levels except for joysticks where the range
is from 1 through 7.
Designing Touch Panel Pages 51