Setting The Joystick Properties; Setting The Channel Code - AMX Color Active-Matrix LCD Instruction Manual

Figure 72
Button Properties page for
Joysticks
Note
If you followed the instructions
for Adding a joystick to a page
subsection, this button's
Properties page appears.
Note
If DEVICE USED is set to 4
and Base Device Number is
128, the Central Controller
recognizes bus devices 128,
129, 130, and 131.
Figure 73
CHANNEL code buttons
50 Designing Touch Panel Pages
9.
Press EXIT SAVE CHANGE to return to the Main page.
10.
Press EXIT to exit from the PROPERTIES operation bar.

Setting the joystick properties

1.
Press EDIT, BUTTON, and the PROPERTIES operation bar.
2.
Press the target button to open the Button Properties page.
3.
Press BUTTON TYPE to open the BUTTON TYPE menu (Figure 77).
4.
Press JOYSTICK in the BUTTON TYPE menu to open the Button Properties page
shown in Figure 72.

Setting the channel code

The channel buttons that set the device and button channel codes for the touch panels
are shown in Figure 73.
Color Active-Matrix LCD Mini-Touch Panels