Information Buttons; Adjustment Buttons; Keypad Buttons - AMX Color Active-Matrix LCD Instruction Manual

Figure 27
Selection button example
Note
These button types will be
displayed in black and yellow
to indicate that they are only
for information and can't be
changed.
Figure 28
Information button example
Figure 29
Adjustment button example
Color Active-Matrix LCD Mini-Touch Panels

Information buttons

Information buttons are read-only buttons that contain serial numbers, firmware ver-
sions, and hardware status information. Figure 28 shows the serial number informa-
tion button in the Setup page.

Adjustment buttons

You can use the UP and DN buttons to set adjustment buttons. The adjustment but-
ton example in Figure 29 sets the baud rate for the RS-232 connector on the touch
panel.

Keypad buttons

The keypad button opens a keypad (Figure 30) so you can enter a password or value
assignment. All buttons on the keypad are interactive except for the entry display.
Touch Panel Basics 25