Adding An Icon To A Button - AMX Color Active-Matrix LCD Instruction Manual

Figure 62
Keyboard
Note
The CHANGE FONT button
only appears when changing
the font of a function button
and does not apply to popup
pages.
Note
You can't create or edit but-
tons with Unicode fonts within
the on-board editor. Any use
of the TEXT/IMAGE button to
alter or create Unicode font
supported buttons must be
done in TPDesign3 Touch
Panel Design Program.
Color Active-Matrix LCD Mini-Touch Panels
6.
Enter MAIN PAGE. The text appears in the message box at the top of the key-
board. If you exceed the space in the button, the touch panel edits the message to
fit in the space provided. Change the size of the button or reduce the font size to
compensate.
7.
Press EXIT CHANGE to close the keyboard and return to the Text/image page.
8.
Press MAKE ON SAME AS OFF to set the text for both TEXT ON and TEXT OFF
states of the button.
9.
Press EXIT SAVE CHANGE to close the Text/image page and return to the Main
page.
10.
Press EXIT in the Edit bar to exit Edit TEXT/IMAGE mode.

Adding an icon to a button

Use the BUTTON option in the Edit bar to add icons to buttons, joysticks, bargraphs,
and video windows.
1.
Press EDIT to open the Edit bar.
2.
Press BUTTON on the Edit bar to open the BUTTON menu.
3.
Press TEXT/IMAGE to add text to the button. The TEXT/IMAGE operation bar
appears.
4.
Press the button to open the Text/image page.
Designing Touch Panel Pages 43