Protected Setup Page - AMX Color Active-Matrix LCD Instruction Manual

Color active-matrix lcd mini-touch panel firmware version g3 or higher
Hide thumbs Also See for Color Active-Matrix LCD:
Table of Contents

Advertisement

Figure 104
Protected Setup page flow-
chart
Note
When the Edit bar is enabled,
you do not have to enter the
password when opening the

Protected Setup page.

Color Active-Matrix LCD Mini-Touch Panels
the lead-acid battery is not charging. Charging appears when the lead-acid
battery is charging. The shaded area is a horizontal gauge moving from left
to right as the battery voltage level increases.
AMX RF ON/OFF
Supply Voltage vX.XX
supply (optional) connected to the SMT-PKM.
IR 38 kHz/455 kHz/OFF
kHz, 455 kHz, or OFF.
Protected Setup Page
The Protected Setup page allows you to set passwords, mouse control, and communi-
cations parameters. The flowchart in Figure 104 shows how to access the Protected
Setup page, which is password-protected. When you press the PROTECTED SETUP
button on the Setup page, a number keypad appears.
MAIN
SETUP
PAGE
BUTTON
Enter 1988, which is the system default password, and press ENTER to open the Pro-
tected Setup page. (You can change the password, as explained in the Setup password
subsection.) If you enter a wrong number, press CLEAR and re-enter the number.
The Protected Setup page (Figure 105) appears when you enter the correct number.
Shows RF transmission on or off.
Shows the voltage level of the external power
Shows the IR transmitting frequency to 38
PROTECTED SETUP
BUTTON
Touch Panel Program Reference
TYPE
1988
69

Advertisement

Table of Contents
loading

Table of Contents