Setting The Channel Code; Setting The Level Code - AMX Color Active-Matrix LCD Instruction Manual

Figure 79
Bargraph CHANNEL code
buttons
Note
The panel will not allow you to
enter a device number greater
than the DEVICE USED with-
out first displaying a decision
box. This box asks you to de-
cide whether you accept the
new selection or default to the
previous value.
Note
The channel code for non-
active buttons is 0 and for
active buttons is 1 through
255.
Figure 80
LEVEL code buttons
Note
The panel will not allow you to
enter a device number greater
than the DEVICE USED with-
out first displaying a decision
box. This box asks you to de-
cide whether you accept the
new selection or default to the
previous value.
54 Designing Touch Panel Pages

Setting the channel code

The channel buttons that set the device and button channel codes for the touch panels
are shown in Figure 79.
1.
Press DEV to open the keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device
codes 1 through 4 to identify the touch panel. Refer to the Touch Panel Program
Reference section for detailed information.
3.
Press ENTER to store the device number into memory, close the keypad, and re-
turn to the Button Properties page.
4.
Press CHAN to open a keypad and enter a channel value of 1 through 255 in the
keypad. The AXCESS software program uses the channel code number to iden-
tify the button and its' operations.
5.
Press ENTER to store the channel number into memory, close the keypad, and
return to the Button Properties page.

Setting the level code

The level buttons that set the device and number codes for the touch panels are
shown in Figure 80.
1.
Press DEV to open a keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device
codes 1 through 4 to identify the touch panel. Refer to the Touch Panel Program
Reference in this manual for detailed information.
3.
Press ENTER to store the level device number into memory, close the keypad,
and return to the Button Properties page.
Color Active-Matrix LCD Mini-Touch Panels