Exiting Edit Mode - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Figure 75
PAGE menu
Figure 76
Edit bar
ViewPoint Wireless Touch Panels
21. Press NEW PAGE to set the page flip and return to the Button Properties page.
22. Press EXIT SAVE CHANGE to save changes, close the Button Properties page,
and return to the Main page.
23. Press EXIT on the PROPERTIES operation bar to close the Edit bar.

Exiting Edit Mode

This subsection describes exiting the EDIT mode once you finish designing touch
panel pages.
1. Press EXIT to close the Edit bar (Figure 76).
2. Press SETUP to open the Setup page shown in Figure 77.
Designing Touch Panel Pages 55