Table of Contents
Advertisement
Figure 142
Edit bar — BUTTON menu
Note
Buttons with Unicode fonts
can only be created and ed-
ited within TPDesign3 then
imported to the touch panel.
Figure 143
ADD BUTTON operation bar
Note
You can adjust the button po-
sition with the MOVE and RE-
SIZE operation bars.
Color Active-Matrix LCD Mini-Touch Panels
Edit Bar — Button Menu Options
Press EDIT to open the Edit bar and BUTTON to open the menu shown in
Figure 142.
You can use the BUTTON menu to create, configure, and revise touch panel button
settings. Buttons containing usable fonts can not have their text or images altered be-
cause their code is locked. The Edit bar also shows the current page name. The Edit
bar in Figure 142 shows Main is the current page.
Add
Press ADD to add a button when the ADD BUTTON operation bar (Figure 143) ap-
pears on the LCD. The first touch point is the upper-left corner of the button.
Drag your finger horizontally across the screen and down to set the height and width
of the button. When the new button appears on the page, the message bar shows you
the X/Y page-position coordinates and the X/Y resolution size.
Press the EXIT button in the Edit bar to exit. Use the PROPERTIES operation bar to
set the button color, border style, and configuration settings.
Touch Panel Program Reference
83
Advertisement
Table of Contents
