Table of Contents
Advertisement
Figure 200
Affected Send_Commands
124
AXCESS Programming
AXCESS Programming
Overview
You can program the touch panel to perform a wide variety of operations using
AXCESS Send_Commands and variable text commands. Use the commands de-
scribed in this section along with the AXCESS Programming Language instruction
manual to program the Central Controllers.
AXCESS Programming Changes
The AXCESS program may need to be modified to conform to those ranges and vari-
ables set in the new version 3.xx firmware.
The following describes those version 2.xx features that have either been modified or
are no longer supported within the new version 3.xx firmware:
•
The elapsed timer feature is not supported by the version 3.xx.
E - Timer
firmware. AXCESS code can be written to simulate this feature.
•
ICONS features
version 2.xx firmware, such as the E-Timer, 16 and 32 Char Term, are also
not supported in version 3.xx.
•
SEND_COMMANDs
adapted to conform with the new parameters and enhanced functionality
present in the version 3.xx firmware.
Affected Send_Commands
Command
Description
!C
Sets the border, font, and text in one command
!F
Shorthand version of 'FONT' command
!I
Shorthand version of 'ICON' command
CBON
Sets the ON feedback border color to the specified color
CBOFF
Sets the OFF feedback border color to the specified color
FONT
Changes the font size (or style) of the text in a specific button
ICON
Changes border style of a specific button
All other AXCESS Color and Variable text Send_Commands are listed in this section.
They should be checked to verify that they comply with version 3.xx parameters and
functionality.
Some features within the Icons drop-down menu in the
Figure 200 of some commands that need to be
Color Active-Matrix LCD Mini-Touch Panels
Advertisement
Table of Contents
